Low FPS on Connection

Troubleshooting

Low FPS on Connection

Postby klaus47 » 25 Jan 2021, 13:09

Hello guys,
I run LM on about 15 computers. They are in the same high speed local network, and the connection is IP based. It all went perfectly until I changed the IP address for half the PCs....
I've set the new IPs (which are in another IP range, different Mask, Gateway, DNS) both in Server and in Viewer and run the connection.
The result I got is strange. The old IPs work great (20+ FPS, >25.000 kBit/s) but with the new ones is terrible (2-5 FPS, 1000-5000kBit/s) and the feed is really laggy (2-4 seconds delay when I use the mouse, or type).

If I run a VPN connection it's even worst. Btw, is there any way to bypass a VPN connection, and let the LM run on the regular connection?

I tried to lower the colors to 15 bits (can't go lower, I need the quality), and to set the CPU usage to high, or even FPS. Without success.
The economy mode setting is not for me, the quality is too low.

Any suggestions?
klaus47
 
Posts: 1
Joined: 25 Jan 2021, 12:39

Re: Low FPS on Connection

Postby admin » 28 Jan 2021, 06:42

Try using a NOIP
Best Regards LiteManagerTeam
admin
Администратор
 
Posts: 522
Joined: 07 Jun 2010, 13:19

Re: Low FPS on Connection

Postby TyraNoah » 13 May 2021, 17:53

I have been running into such issues for my work place set ups. Any solutions that you'd recommend and that perhaps worked for you that time?
TyraNoah
 
Posts: 1
Joined: 13 May 2021, 17:50

Re: Low FPS on Connection

Postby admin » 14 May 2021, 05:44

If you have 0 FPS it is not a problem, maybe remote screen is not changing at this moment
Best Regards LiteManagerTeam
admin
Администратор
 
Posts: 522
Joined: 07 Jun 2010, 13:19


Return to LiteManager: Support

Who is online

Users browsing this forum: No registered users and 4 guests

cron