Direct IP Connection Isues

Troubleshooting

Direct IP Connection Isues

Postby slynch401k » 13 Sep 2018, 14:42

I am coming from Radmin. Here is how it works: Setup server on remote machine, Open port to remote machine. Setup viewer with remote static ip and port. Connection done.

I cannot get this to work with LiteManager. I have tried the NoIP server and wasted about 5 hours. It works via VPN and direct IP, but every other direct access method fails.

Can I connect directly? Or do I have to use the NoIP server? There are way too many options and it is confusing as the tutorials are very poor.
slynch401k
 
Posts: 1
Joined: 13 Sep 2018, 14:36

Re: Direct IP Connection Isues

Postby admin » 14 Sep 2018, 07:36

Can I connect directly? Or do I have to use the NoIP server? There are way too many options and it is confusing as the tutorials are very poor.

Yes, it possible LiteManager similar to RAdmin

Setup server on remote machine, Open port to remote machine. Setup viewer with remote static ip and port. Connection done.

Setup LM Server on remote PC with static IP and port, it's slave side (default Port 5650)
Setup LM Viewer on main PC that will control others, main side

Online help
Server and Viewer installation

http://www.litemanager.com/support/help_en/
http://www.litemanager.com/support/Knowledgebase_en/
Best Regards LiteManagerTeam
admin
Администратор
 
Posts: 212
Joined: 07 Jun 2010, 13:19

Re: Direct IP Connection Isues

Postby adb » 16 Sep 2018, 15:23

I am coming from Radmin too.
the idea is that you can connect to an endpoint device in many ways

connecting with IP/DNS on LAN.
over WAN, forward ports on router to every PC.
forward a port to 1 PC, and use the "cascade" mode on the viewer, same as "connect through" in Radmin.
if you can't open ports on the server side, use the NOIP tool.
adb
 
Posts: 1
Joined: 16 Sep 2018, 15:18


Return to LiteManager: Support

Who is online

Users browsing this forum: No registered users and 1 guest

cron