Understanding NOIP server options

General talks about LiteManager utility.

Understanding NOIP server options

Postby ToddMiles » 31 Jan 2020, 18:42

So I have 2 separate LANs in different cities each with their own firewall. Our main office has our server farm and our main router.

If I understand this correctly we can purchase Litemanager for each PC we wish to connect to remotely on both local and remote LAN.

Then it gets a little foggy - so I configure a NOIP server on our LAN with a private IP Address 192.168.1 50 and use port forwarding on our router to send it to our private LAN IP
ie: 108.xxx.xxx.12:4925 -> 192.168.1.50

I then point all the LMServers to 108.xxx.xxx.12:4925 to register and LMviewers to 108.xxx.xxx.12:4925 to access by ID?

Please comment on this config and any holes in it. Thanks
ToddMiles
 
Posts: 1
Joined: 31 Jan 2020, 18:31

Re: Understanding NOIP server options

Postby admin » 01 Feb 2020, 09:06

Hello ToddMiles !
Everything you said is correct. It should works well.
LiteManager has 30 day trial, test it all.

I need more information, instructions you can find it here
http://www.litemanager.com/support/help_en/
http://www.litemanager.com/support/Knowledgebase_en/

Please don't hesitate to contact me if you have any questions.
Best Regards LiteManagerTeam
admin
Администратор
 
Posts: 476
Joined: 07 Jun 2010, 13:19


Return to LiteManager: General Discussions

Who is online

Users browsing this forum: No registered users and 2 guests

cron